ServicesAboutReviewsContact Call (678) 395-7459
Porsche Specialists  ·  Snellville, GA  ·  4.9★ Rated

PORSCHE
INSPECTION
SERVICE

Comprehensive Porsche inspections in Snellville, GA — pre-purchase, annual, and pre-track day. We check every system with Porsche-compatible PIWIS diagnostics so you know exactly what you're buying or what your car needs.

15+
Years Serving
Gwinnett County
4.9★
Google Rating
Verified
OEM
BMW-Approved
Oil & Filters
CARFAX
Top-Rated
Shop
same
week
Appointments
Available
What You Get

WHAT'S INCLUDED IN YOUR
PORSCHE INSPECTION

Every Porsche inspection covers the full vehicle — mechanical, electrical, and structural — with a written report you can use to negotiate, plan maintenance, or simply drive with confidence.

🖥️
PIWIS Diagnostic Scan
We connect Porsche-compatible PIWIS diagnostic software to read all module fault codes — engine, transmission, PDK, PASM, PSM, and more. Every stored and pending code is logged and explained.
🔧
Full Mechanical Inspection
Engine, transmission, cooling system, brakes, suspension, steering, exhaust, and drivetrain — we inspect every mechanical system and document condition, wear, and any immediate concerns.
🛞
Brake & Suspension Check
We measure brake pad and rotor thickness, inspect caliper condition, check PCCB ceramic brake wear (if equipped), and inspect all suspension bushings, ball joints, and tie rod ends for wear and play.
💧
Fluid Condition & Leak Check
We check engine oil, coolant, brake fluid, transmission fluid, and power steering fluid condition and levels. We also inspect for active leaks at all gaskets, seals, and hose connections.
🔋
Electrical & IMS/RMS Check
We inspect battery health, charging system, and all lighting. On applicable 996/997 models we check for IMS bearing and RMS seal issues — the known failure points every Porsche buyer needs to know about.
📋
Written Inspection Report
You receive a detailed written report covering every system inspected, its condition rating, and recommended actions — ranked by urgency so you know what to address immediately vs. monitor over time.
Why German Performance

PORSCHE INSPECTION
SPECIALISTS

Porsche inspections require platform-specific knowledge — IMS bearing risk on 996/997, coolant system failures on Cayenne, PDK adaptation issues, PASM faults. A generic inspection checklist won't catch what matters on a Porsche.

  • PIWIS-compatible diagnostics covering all Porsche modules and fault codes
  • IMS bearing and RMS seal assessment on all applicable 996 and 997 models
  • PDK, Tiptronic, and manual gearbox inspection and fluid condition check
  • PCCB ceramic brake wear measurement — a $10,000+ replacement most shops miss
  • Pre-purchase inspections available — know what you're buying before you commit
  • Independent pricing — significantly less than Porsche dealer inspection rates
Location
Snellville, GA
2144 Parkwood Rd NW
Snellville, GA 30078
Hours
Mon – Fri
9:30 AM – 6:00 PM
Sat – Sun: Closed
Phone
(678) 395-7459
Same-week slots usually available
Serving
Gwinnett County
Snellville · Loganville · Grayson · Lawrenceville
BUYING A PORSCHE OR
DUE FOR AN INSPECTION?
Call us — we'll get you scheduled quickly.
Call (678) 395-7459
Common Questions

PORSCHE INSPECTION FAQ

A pre-purchase inspection (PPI) is a comprehensive mechanical and diagnostic evaluation performed before you buy a used Porsche. We check every system, pull fault codes, inspect for known failure points like IMS bearings and RMS seals, and give you a written report — so you know exactly what you're getting before you hand over money.

Call us for current pricing — it varies by model and inspection type. A pre-purchase inspection is one of the best investments you can make on a used Porsche. A single overlooked IMS bearing failure or coolant system issue can cost more than the inspection fee many times over.

We inspect the full Porsche lineup including 911 (996, 997, 991, 992), Boxster, Cayman, Cayenne, Macan, and Panamera. We have specific knowledge of the platform-specific failure points for each generation.

The IMS (Intermediate Shaft) bearing on M96 and M97 engines in 996 and early 997 models is a known failure point. When it fails, it can send metal debris through the engine, causing catastrophic damage. We assess IMS bearing risk and condition as part of every inspection on these models and can advise on preventive replacement options.

Yes — this is one of the most common reasons people bring a Porsche to us. Have the seller bring the car to our shop, or arrange transport, and we'll give you a full pre-purchase inspection report. We can also advise on how to use the findings in price negotiations.

A comprehensive Porsche inspection typically takes 2–3 hours. We recommend dropping the vehicle off in the morning. We'll call you with findings before you pick it up so you have time to ask questions.

Get Started

SNELLVILLE'S PORSCHE SPECIALISTS

Serving Snellville, Loganville, Grayson, Lawrenceville, and all of Gwinnett County.

Call (678) 395-7459 Get Directions